Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance
of strength and ductility. The material has good toughness and is readily
weldable. This material is very corrosion resistant in highly oxidizing and
mildly reducing environments.
Standard Specification: ASTM B348, ASME SB348, ASTM F67 Surgical Implant, ISO, DIN AMS-T-9046B CP3 AMS 4902 MIL-T-9046J CP
| Standard | Werkstoff No. | UNS | 
| Commercial Pure Titanium Grade2 | 3.7035 | R50400 | 
Technical Data Sheet
| Chemical Composition | ||||||
| Weight % | Ti | C | Fe | N | O | H | 
| Commercial Pure Titanium Grade2 | Balance | 0.08 | 0.3 | 0.03 | 0.25 | 0.015 | 
Typical Mechanical Properties (Tensile Requirements)
| Material | Tensile Strength, min | Yield Strength (0.2% Offset) min or range | Elongation in 4D,min% | Reduction of Area Min % | ||
| ksi | MPa | ksi | MPa | |||
| Commercial Pure Titanium Grade2 | 50 | 345 | 40 | 275 | 20 | 30 | 
Titanium 8-1-1 (8Al-1Mo-1V) is a near alpha alloy offering good weldability and with superior creep resistance at operating temperature up to 450°C. Alloy 8-1-1 has a relatively high tensile modulus
Titanium Alloy Grade 12 is lightly alloyed near-alpha alloy offering improved strength at elevated temperatures and optimum ASME Code design allowables. The material is readily weldable, and
Titanium 6-2-4-2 (6Al-2Sn-4Zr-2Mo) is an alpha-beta titanium alloy capable of being heat treated to higher strengths in greater section sizes that 6Al-4V. Widely used in forged components, 6-2-4-2 be
Titanium Alloy Grade9 Ti-3Al-2.5V alloy is an alpha alloy that is strengthened by cold working. The material exhibits good ductility and toughness. It is used in a wide range of tubular pro
Customer service hotline:0086-18501750581
Service time:8:00 - 18:00